GAMMON TECHNICAL PRODUCTS Filter Accessories
Gammon Technical Products has distributors covering every country in the world, most are local small specialty businesses. We believe strongly in local support. Our commitment to quality remains with a dominating presence in Viper additive injection equipment, the MiniMonitor, Aqua-Glo and B/2 field testing and sampling equipment and of course the famous Gammon Gauge.
AIR ELIMINATOR, ALUMINUM
The most reliable air eliminators, 1/16" air outlet orifices. Structural pressure rating is 250 psi on all models. Repairable replacement parts available.
Technical Specs:
- 208 PSI. 3/4″ FNPT AL in and out
- Dimensions, 6 3/16″ Dia.
- Weights, 3.2lbs
AIR ELIMINATOR, CAST IRON
Cast Iron air eliminator the most reliable air eliminators, 1/16" air outlet orifices. Repairable replacement parts available.
1CC WATER PROBE
Meets EI-1596. Detects water in filter separator sumps. Allows periodic testing requiring only 1cc of water - even during refueling. Thousands in service world-wide.
Technical Specs:
- Pressures to 300 psi
- Stainless Steel Construction
- Available with 3/4” NPT or 1 1/2” NPT male connection
- US Patent No. 7523645
AIR ELIMINATOR
Stainless steel high air flow at 150 PSI, releases air at 9.44 CFM. Maximum operating pressure 400 PSI. Structural pressure rating 500 PSI.
AIR REGULATOR
Air regulator - panel or side mount, aluminum or plastic knob.
Technical Specs:
- GTP-1121-2P is shown with optional key (GTP-1121-1, sold separately).
KEY FOR AIR PRESSURE REGULATOR
Optional key for the GTP-1121A or GTP-1121P.
JET TEST ACTUATOR WITH GAUGE
Jet test actuator w/ gauge, (as shown) consists of GTP-1174 gauge and GTP-1173A actuator.
1.5" LIQUID FILLED PRESSURE GAUGE
Liquid-filled pressure gauge. Steady pointer reading even when pressure is pulsating or in cases of excessive vibration. Silicone filled.
Technical Specs:
- FACE: 1 1/2” diameter
- CASE: Steel
- BEZELRING: Steel
- CONNECTION: 1/8″ NPT, brass
- MOUNT: Center back
- ACCURACY: ±3%
JET TEST ACTUATOR WITH GAUGE (SHORT)
Short jet test actuator, with gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.
2" CENTER BACK MOUNT PRESSURE GAUGE
2" face pressure gauge, brass center-back mount.
Technical Specs:
- FACE DIAMETER: 2″
- RANGE: 0-160psi
- CONNECTION: Brass, center back
- SIZE: 1/4″ NPT
- CASE: Steel
- BEZEL RING: Steel
- ACCURACY: 3% of span
2" PRESSURE GAUGES
2" Pressure gauge, with brass stem connection.
4.5" PRESSURE GAUGES
4.5" Pressure Gauges.
Technical Specs:
- CASE: Cast aluminum with blowout grommet
- BEZELRING: Polypropylene, Snap-On
- WINDOW: Acrylic
- POINTER: Slotted hub, adjustable
- BOURDON TUBE: Phosphor bronze
- CONNECTION: ¼” NPT, brass
- ACCURACY: 1% of span
CHECK VALVE, 3/4" NPT
Check Valve, Air Eliminator, 3/4"NPT
Technical Specs:
- Viton seal- all stainless steel
CHECK VALVE, 3/4" BSP
Check Valve, Air Eliminator, 3/4"BSPT
AIR ELIMINATOR CHECK VALVE, 1/2"
Air Eliminator outlet check valves prevents drain back.
Technical Specs:
- Viton Seal
- All stainless steel
- Available with NPT or BSP threads
- 1/2″ NPT or BSP
- 7/8″ Hex
- Overall length 2.40″
- Weight .25oz
SOCKET ADAPTER FOR PARKER/VELCON ELEMENTS
Socket adapter for coalescer elements. Designed to fit Velcon Filter Inc. TB type coalescer elements, this socket will accept standard 1/2" square drive torque wrenches and extensions.
HEATER
Heater, 300 Watts, 1-1/4" NPT
Technical Specs:
- Stainless steel sheathing will not rust
- Adjustable thermostats 0-100° F
- 208-240 volts, 50/60 Hz, single phase*
- Watt density: 20 watts per sq. In.
- 150 psi working pressure
- Conduit connections 1”npt
- Made in USA
CHECK VALVE, 3/4" NPT X 3/4" BSP
Check Valve, Air Eliminator, 3/4" NPT/BSPT
DUMMY MONITOR ELEMENT
“Dummy” elements are carefully machined from high grade aluminum and designed to replace any brand of 2” outside diameter element in any vessel. The seal is a Viton o-ring. Includes an adjustable center “rest” to allow easy installation in vessels with element aligning guides. Needs no additional hardware, works with cover interlocks.
Technical Specs:
- Available sizes are 10”, 20”, and 30”
4" LIQUID FILLED PRESSURE GAUGES
Steady pointer reading even when pressure is pulsating or in cases of excessive vibration. Silicone filled.
Technical Specs:
- FACE: 4″ diameter
- CASE: Stainless steel
- BEZEL RING: Steel
- CONNECTION: 1/2″ NPT, brass
- MOUNT: Stem mounted
- ACCURACY: ±1%
2.5" LIQUID FILLED PRESSURE GAUGES
Steady pointer reading even when pressure is pulsating or in cases of excessive vibration. Silicone filled.
Technical Specs:
- FACE: 2.5″ diameter
- CASE: Stainless steel
- BEZEL RING: Steel
- CONNECTION: 1/4″ NPT, brass
- MOUNT: Stem mounted
- ACCURACY: ±3 2/3%
SNUBBER, 1/4" NPT
Snubber, 1/4" NPT, stainless steel or brass.
2.5" PRESSURE GAUGE
2.5" face pressure gauge, brass lower mount. 0-100 or 0-160psi.
Technical Specs:
- FACE DIAMETER: 2.5″
- RANGE: 0-100psi or 0-160psi
- CONNECTION: Brass, lower
- SIZE: 1/4″ NPT
- CASE: Steel
- BEZEL RING: Steel
- ACCURACY: 3% of span
2.5" STAINLESS STEEL PRESSURE GAUGES
2.5" stainless steel pressure gauges, stem mounted, up to 300 psi.
3.5" PRESSURE GAUGE
Pressure Gauge, 3.5" Face up to 300 PSI S/S Stem MTD.
BASIC WATER PROBE
For those who prefer a smaller and less expensive water probe. All-stainless construction. Push button circuit tester. Special drain line design can allow true water testing. 3/4” NPT or BSPT connections.