GAMMON TECHNICAL PRODUCTS FUEL QUALITY TESTING
Gammon Technical Products has distributors covering every country in the world, most are local small specialty businesses. We believe strongly in local support. Our commitment to quality remains with a dominating presence in Viper additive injection equipment, the MiniMonitor, Aqua-Glo and B/2 field testing and sampling equipment and of course the famous Gammon Gauge.
AQUA-GLO KIT - SERIES V
Series V Aqua Glo measures water (to ASTM D 3240) content of Jet Fuel. Detects presence of free water from 1-12 ppm within 1.5 ppm. The AQUA-GLO® Kit employs this unique approach in the determination of the degree of fluorescence (or water content). NSN #6635002449478.
Features:
- New Automatic Power Switching external power supply
- as well as internal battery 120/220 volts 50-60 Hz
- Nickel Cadmium rechargeable battery.
- Fully Instrumented – to eliminate human error.
- Detects presence of free water within 1.5 ppm.
- Test completed in less than 2 minutes.
- Portable – light weight – 8 pounds
- Permanent fluorescing standard.
- Can be recalibrated in the field
AQUA-GLO COMBINATION KIT
The Series V Aqua-Glo was introduced in 2005 with an entirely new power supply. This power supply is external, automatically switching to work with either 120 VAC or 220VAC, 50/60 Hz.Extreme care has been taken in perfecting a standard that will not deteriorate with age. NSN # 6640011382563.
Features:
- New Automatic Power Switching external power supply
- Internal battery 120/220 vac Recharger
- Nickel Cadmium rechargeable battery.
- Fully Instrumented – to eliminate human error
- Detects presence of free water within 1.5 ppm
- Test completed in less than 2 minutes.
- Permanent fluorescing standard.
- Can be recalibrated in the field
- Heavy duty pelican case
MINIMONITOR MARK II COMPLETE TEST KIT
The MiniMonitor® Kit is used to test aviation fuel for particulate contamination using the procedures described in ASTM D2276/IP216. A measured volume of fuel is passed from a flowing pipe directly through a 0.8 micrometer membrane. The plastic monitor holding the membrane is placed in an aluminum housing. Dirt particles are caught on the membrane which can be visually color rated or weighed for a gravimetric rating. NSN # 6640010054490.
Features:
- Carrying case (GTP-9466)
- MiniMonitor assembly (GTP-172H)
- Syringe (GTP-165)
- Sampling kit #5 (GTP-5)
- Tweezers (GTP-2099)
- Color rating book (GTP-1074-1)
- Six plastic monitors (GTP-1985)
- Fifteen Mini Envelopes (GTP-1267)
- Monitor opening key (GTP-9182)
STAINLESS STEEL BUCKET
Stainless Steel Bucket
Options:
- GTP-3905-1Stainless Steel Bucket – 1-5 liters, graduated
- GTP-3905-2 Stainless Steel Bucket – 2 1/4 gallons, not graduated
B-2 DIGITAL REFRACTOMETER
A quick, easy method for determining the volume percent (%v.) of anti-icing additive (FSII) in jet turbine engine fuels. Operator error is minimized and the test is faster.
Features:
- Refractometer
- ASTM D5006
- User Guide
- 2 AAA batteries
- 18″x13″x6″ ID molded black ABS carrying case
Options:
- SC-B-2HB-C-3D – Complete Test Kit
- SC-B-2HB-3D B-2 – Device only
APPARATUS FOR ASTM TEST METHOD D5452
Gravimetric to ASTM D5452 designed for safety from electrostatic hazards during filtration.
Features:
- Complete Apparatus Assembly, includes each of the following items
- Support Test Stand
- Flask, 4 liter, graduated
- Dispensing Plug for 1 gallon sample can
- Dispensing Cap for 1 gallon sample can
- One gallon Sample Container
- Two Flask to Flask Connect Hose
- Vacuum Attachment/Stopper Assembly
- Flask Bonding and Grounding Cable
- Apparatus Bonding and Grounding Cable
- Filter Holder/Funnel Assembly
⅓ U.S GALLON- IN-TANK SAMPLER
The unique model GTP-9021 was developed specifically to fit through the small gauging found on U.S. Air Force bases where level gauging electric cables are also present. It was important that there be no tangling of our sampler with those cables and that those cables not be damaged. Therefore, the outside diameter is only 3.1 in (79 mm).
Technical Specs:
- 1/3 US gallon capacity (1260 mL)
- Stainless steel
- If lowered to the bottom of a tank, the sample will be collected at a level 10.8 in (275 mm) above the bottom.
- Comes with 65-foot (19.8 m) long stainless steel chain so that the sampler can be grounded to the tank.
- Stainless steel chain is tangle resistant.
- No copper or brass
WATER SUMP FLOAT TESTER
Water Sump Float Tester for testing the emergency shut down system on aircraft refueling systems. A controlled volume of water is slowly pumped by hand into the filter separator sump. If the emergency shut down system is operating correctly, fuel flow will stop automatically when the level of water in the sump reaches the sensors.
Features:
- Constructed with materials that will not rust or corrode in water
- Stainless steel and brass are the primary materials
- Hoses are pressure rated for 250 psi
FLOAT TESTER
Tester with two wheeled cart, transparent measuring container at top has adjustable level indicator that the operator can see that all of the water that was pumped into the filter separator sump has been recovered. Water filling port is at top see chained plug, overflow pipe carries excess fuel to five gallon slop collector on lower platform.
METER MONITOR US/G
The meter monitor makes closed circuit membrane testing possible and avoids the need for a measuring bucket and the need to dispose of fuel.
Technical Specs:
- 1/4″ NPT inlet and outlet
Options:
- GTP-1850A-1Meter Monitor US/G – Seals For FSII
- GTP-1850A Meter Monitor US/G – US Gallons
METER MONITOR LITERS
The meter monitor makes closed circuit membrane testing possible and avoids the need for a measuring bucket and the need to dispose of fuel.
Technical Specs:
- 1/4″ NPT inlet and outlet
Features:
- Meter (liter) calibration with or without special seal
Options:
- GTP-1850A-3Meter Monitor Liters – Liters
- GTP-1850A-4 Meter Monitor Liters – Seals For FSII
AIRCRAFT REFUELING HOSE TESTER
The Gammon Aircraft Refueling Hose Tester is made of non-ferrous materials, designed for periodic testing of jet refueling hose, using jet fuel for pressurizing.
Features:
- The unit consists of a 10 U.S. gallon (38 liter) aluminum tank (GTP-2234) equipped with a vented fill cap, hand pump (GTP-8076), 0-1000 psi 4.5” face pressure gauge (GTP-281-H), quick disconnect (GTP-1004-4MA), and six feet of 1/4” hose (GTP-8079) to connect to the tester.
FLUSHING HEAD VALVE AND MONITOR HOUSING FOR MINIMONITOR
Flushing head valve and monitor housing used for the MiniMonitor (GTP-172-H) and MiniMonitor Kit (GTP-172).
Features:
- Flushing Head Valve Assembly (GTP-190)
- Monitor Housing (GTP-232-1)
- Bottom Cap (GTP-232-2)
HOSE ASSY
Hose Assembly, outlet, for GTP-191 pad holder assembly for the Aqua-Glo unit.
MULTIMINIMONITOR ASSEMBLY ONLY
This is the MultiMiniMonitor assembly only, separate from the MultiMiniMonitor kit (GTP-1172).
Features:
- Flushing head valve and monitor assembly (GTP-3466)
- Bonding and grounding hose assembly (GTP-1110)
- Bypass quick disconnect and hose assembly (GTP-1250)
- Bypass tee(GTP-302C)
- Double-ended adapter (GTP-988)
MINIMONITOR ASSEMBLY ONLY
This is the MiniMonitor assembly only, separate from the MiniMonitor kit (GTP-172).
Features:
- Flushing head valve and monitor body assembly (GTP-172A)
- Bonding and grounding hose assembly (GTP-1110)
- Quick disconnect and hose assembly (GTP-1250)
- Bypass tee assembly (GTP-302C)
AQUA-GLO PAD HOLDER
Aqua-Glo Pad Holder Assembly used with GTP-25 water detector pads (25mm).
AQUA-GLO PADS
The water detector pads are used in the Aqua-Glo Kit to ASTMD 3240, and are produced in compliance with MIL-D-81248 {WP} . Each pad is packaged in an air and moisture proof envelope. NSN # 6640002353820.
Features:
- 50 per box
Technical Specs:
- Diameter is 25mm
AQUA-GLO SERIES V W/POWER CORD AND STANDARDS
Aqua-Glo Water Detector Series V Only with power cord and standards. 120/220 Vac.
FLUSHING HEAD VALVE ASSEMBLY FOR MINIMONITOR
Flushing Head Valve Assembly For GTP-172
EXTERNAL POWER SUPPLY
External Power Supply, 120-240 VAC For Aqua-Glo Series V
SYRINGE
Syringe, MiniMonitor/Aqua-Glo
CALIBRATED PLASTIC BOTTLE
Calibrated Plastic Bottle 500 ML for Aqua-Glo Kit.
Technical Specs:
- Weight 3oz
STANDARDS SET
Fluorescing and Calibrating Standards Set for Aqua-Glo water detection.
ASTM COLOR RATING BOOKLET
Color Rating Booklet used for color rating filter membranes for aviation turbine fuels in accordance with Appendix X1 of ASTM Test Method D2276/IP216.
Features:
- Each color standard panel has been certified by Munsell Color to Triple A standards for chroma valve and hue.
- Each color standard has a 1″(25mm) window so the the membrane can be viewed for better accuracy in rating.
- Fuel resistant lamination is provided on the back of each color page to prevent wet membrane from soaking the page and altering color.
COLOR AND PARTICLE RATING CHART
In presenting all 33 colors and the 9 particle photographs on one 8 1/2"x11"chart, our model provides convenience that has never before been achieved. Particle assessment is a requirement in Section 2-17 of ATA-103, along with color rating.
AIR FORCE COLOR RATING BOOK
This booklet contains the same color rating pages as the standard booklet, with the addition of a particle assessment rating guide at the back of the book.
FILTER TEST MEMBRANES
Single Membrane Refills for particulate contamination detection by color, with 100 membranes and 100 support pads. Approved for testing jet fuel per ASTM Methods D2276/IP216 D5452. Interchangeable with Millipore P/N AAWP-037-PO.