GAMMON TECHNICAL PRODUCTS VALVES & NOZZLES
Gammon Technical Products has distributors covering every country in the world, most are local small specialty businesses. We believe strongly in local support. Our commitment to quality remains with a dominating presence in Viper additive injection equipment, the MiniMonitor, Aqua-Glo and B/2 field testing and sampling equipment and of course the famous Gammon Gauge.
GAMMON SKYHAWK NOZZLE 1500
SKYHAWK 1500 Overwing Nozzle w/oval spout, dust cap & ground cable
PRESSURE VALVE 150 PSI
Bronze, available settings from 5 to 300 psi, non-certified. 3/4" Male x 3/4" Female.
PRESSURE RELIEF VALVE
Carbon steel, 3/4" male x 1" female Stainless Steel Internals relieves pressure caused by thermal build-up standard setting 150psi.
WATER DRAIN VALVE
Air operated water drain valve assembly. Stainless steel and aluminum construction with a 1" connections. Break away groove prevents accidental tank drainage in case of accident.
DRAIN VALVE
Brass body, brass shaft with a stainless steel spring drain valve and nitrile compound seal. Heavy duty construction to withstand exposure and external wear and tear.
NOZZLE CONNECTOR WEAR GAUGE
Stainless Steel Connector Tester for F116/F117/F211 Nozzles. Detects if the nozzle interlock is worn past safe limits.
NOZZLE GAUGE
Liquid filled nozzle pressure gauge with heavy duty stainless steel mount and guard.
FUELING ADAPTER
Aluminum three-lug adapter manufactured in accordance with MS-24484-2.
JET TEST ACTUATOR WITH GAUGE
Jet test actuator w/ gauge, (as shown) consists of GTP-1174 gauge and GTP-1173A actuator.
JET TEST ACTUATOR WITH GAUGE (SHORT)
Short jet test actuator, with gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.
JET TEST ACTUATOR (STD LONG)
Standard Stainless Steel the actuator can be attached permanently to the test apparatus or pressure gauge. NSN# 1680011329426.
JET TEST ACTUATOR SHORT
Jet Test Actuator Short version is available to fit the "S"and "AH" couplers. 300 Series, stainless steel.
DUST/SEAL PLUG - STANDARD, TEE
Dust/seal plug, standard length, with tee end. Suitable for use with the standard GTP-235-3/8 Jet Test QD® coupler.
CHECK VALVE, 3/4" NPT
Check Valve, Air Eliminator, 3/4" NPT
Technical Specs:
- Viton Seal – All Stainless Steel
CHECK VALVE, 3/4" BSPT
Check Valve, Air Eliminator, 3/4" BSPT
DUST/SEAL PLUG - SHORT, KNURLED
Seal Plug, Short with Knurled End for Jet Test QD - Replaces GTP-235-9S
3-WAY BALL VALVE
3-Way Ball Valve was designed to assure you that pressure drop data will be obtained correctly.
3 WAY BALL VALVE FOR THE VIPER
GTP-2305-1-070 Three way test valve for Kathon,Ci/Li, Stadis 450, +100 used on the Additive Injector Systems.
Technical Specs:
- 3 x 2 5/8″
- Weight: .6 oz.
SAMPLING VALVES
Sampling valve assembly with aluminum toggle valve and choice of actuator.
Technical Specs:
- Aluminum Toggle Valve
- Weight: 8 oz.
JET TEST ACTUATOR (SHORT)
Short jet test actuator, with no gauge. Short versions are used for Avery-Hardoll (now Meggitt) nozzles.
STRAINER
24 x 110 mesh, stainless steel strainer. Optional strainer for all 1 1/2" actuators, except GTP-920-3S. For strainer and actuator assembly, see GTP-1510 - NSN# 4730010845226.
MALE ACTUATOR
Aluminum 2" male actuator for GTP-917-1 with stainless steel wear ring.
